How Long Does Bathtub Reglazing Last: Four Important Steps To Reglaze Bathtub

Four Important Steps To Reglaze The Bathtub

Reglazing the bathtub is a cheap way to restore any old fixture that will also detach the stains, scratches, and chips as well. Once the users properly perform this procedure, the reglazed bathtub will look pleasing and new as the users will take the proper care of it. The long-lasting duration of the reglazing finish will depend upon the materials that have been used, cleaning, and the maintenance service of the tub.

Step 1: The Process

Reglazing the bathtub usually requires removing off the pre-existing glaze. Usually, the professionals use the hydrofluoric acid and in order to attain this, they need to rinse down the bathtub and then sand it down accordingly. Once the users are successful in detaching the pre-existing finish then they need to clean off all the dust and the debris particles and fill up all the cracks or the holes that are present within the tub surface. Then after filling up the holes the tub is completely ready to get glazed and the users need to apply the 2 epoxy coats so as to be assured that the finishing coat will adhere perfectly. The users then need to spray down the high gloss shine material over the entire surface of the bathtub so that they will achieve the smooth finish.

Step 2: Professional Vs DIY

The professionals usually use the acrylic, urethane or the polyurethane material to reglaze the bathtub while the users can simply use the paint or the epoxies coats. Usually, these user-friendly materials are not harmful but they are not that much durable like the professional material can last for a longer period of time without getting chipped or ripped off so easily.

Step 3: The Bottom Line

The glazing duration usually depends upon a few factors like whether the users did the glazing process personally or they have hired the professional, how they maintain, or clean their bathtub finish. The professional refinishes also offer the warranties that can easily last for near about 5 years. The users can easily make their finish to last for a longer period of time by proper cleaning and caring.

Step 4: Prolonging The Finish

If in case the users had their bathtub reglazed then they need to take the proper care so as to prevent it from the discoloration, scratches, or the chips as well. The users are advised not to use the bleaches, harsh cleaners, steel wool over the surface of the reglazed bathtubs as that can easily harm the coating. While the cleaning process, they need to use the non-harmful bleach free cleaners and always re-apply the urethane polish every six months so as to prolong the coating life.