Step By Step Process To Remove Green Algae From A Vinyl Fence
Vinyl fencing can turn green or yellow due to algae growth. Sugars and other nutrients that gather on the fence from neighboring vegetation are consumed by algae. Fortunately, since vinyl fences are non-porous, any stains—from algae, mold and mildew, dirt, or leaves—will only appear on the surface. Instead of just giving your fencing a garden hose spray down, it might be time to pressure wash it if these stains and other general filth start to build up on it. Compared to a wood fence that needs to be painted every year or two and has chipped paint, vinyl fencing takes less care. The fence just needs to be washed occasionally, much like vinyl siding, to keep dirt and algae to a minimum. The side of the fence with less sun exposure is where algae development typically develops. Sunlight destroys algae, but if it is blocked, fungus takes over and leaves a dark green swath across the vinyl fencing. Clean up the green algae on your fence and landscape.
Things You Will Need
- Gallon Bucket
- Dish Soap
- Garden Hose
- Stiff-Bristle Brush
Easy Step By Step Process
- Two tablespoons of dish soap and warm water are added to a gallon bucket. Use a yard hose to wet a 6- to 8-foot length of the vinyl fence.
- Scrub the algae stains with a stiff-bristle brush after soaking it in the soapy water. To remove the algae from the vinyl, using a scrub brush with moderate to firm pressure. With the brush, completely dry the moist area.
- Use the outdoor hose to rinse the vinyl of the soap and algae. Beginning at the top of the fence and going downward, squirt water. Next, wet with the hose the 6- to 8-foot section after you have moved on. Apply the same technique to the fence, cleaning it from top to bottom in parts.
- To help whiten white vinyl fences, you can add 1/4 cup of chlorine bleach to the soapy water, but be careful because bleach might damage nearby plants.
- To avoid bending or stooping to reach the lower fence level, sweep the bottom sections of the fence with a broom.
Removing Algae From Concrete
- Use Boiling Water
Try removing the algae off your sidewalk with boiling water before applying potentially dangerous chemicals, especially if the seaweed is growing close to grass and other plants. Carefully pour boiling water over the green surface after getting a bucket full of it. Next, work on the impacted regions with a hard brush. Finally, wash any debris away using a hose. - Dry It Away
When the concrete surface is dry, trying to remove algae will be easy. It also lessens the spread of spores into the air when algae are removed from a surface that has dried out as a result of exposure to sunshine. The migration of algal spores should be kept to a minimum. You might try to dry the area with a heater or a fan if sunlight is unable to do so. Use a stiff push broom or a deck broom to scrub the area once it is dry and clear of moisture. Use a plastic scraper in addition to the brush to deal with some particularly difficult surfaces. - Use A Pressure Washer
Through its nozzle, a pressure washer sprays water onto the surface. By choosing the right nozzle, you may achieve a quick and efficient removal process without causing any damage to your property. It is possible to buy, borrow, or hire a pressure washer. All you require is an outdoor power and water hookup. If you've never used a power washer before, you should ease into it. Start at a distance to ensure that you do not damage the surface if you are unsure of the type of water pressure the gadget ejects.