Step By Step Process & Items Required For Hanging Curtains With Command Hooks
The curtains are considered as the easiest option to add beauty to the rooms. The users can either use the curtains for the decorative purpose or to block up the light in the room. Usually, most of the landlords do not allow their renters to drill down the holes within the wall surface that is a basic thing if the users want to install the curtain rod. The users can easily hang their curtains with command hooks at home by gathering the below-mentioned materials and then following the below-defined steps:
Material Required
- Command Hooks, Curtain Rod, Rubbing Alcohol
- Pencil, Ruler Or Measuring Tape, Saw
- Painter's Tape, Primer For Plastic And Newspaper
Step I: Mark And Clean The Wall
- Purchase The Hooks: Start by purchasing the three command hooks that need to match with the rod of the curtain. Usually, the hooks are available in the metallic finishes which can be easily purchased from the nearby home store. The users require to have one hook for the window frame side and the other one for the center. If in case the users are having the narrow window then they are advised to use the two hooks.
- Use The Rubbing Alcohol: Then wipe down the upper side of the frame of the window by using the rubbing alcohol but the users are advised not to vigorously rub the cloth. The users are also advised not to use the cleaner containing the oil that can easily forbid the hooks from getting stuck with the wall. On the other hand, if the rubbing alcohol is rubbed hard then it will detach the paint.
- Mark The Places: Now the users require to mark those places on the wall where they actually want to install their hooks. They need to position the hooks adjacent to the surface of the wall where the users want it to place and then trace down the base, sides, and topmost corners by using the pencil.
- Trim The Long Hooks: If in case the users are having the hooks that are very long then they are advised to cut the topmost hook part. Then they need to position the hook adjacent with the wall where exactly they have made the marks. If in case the hook top is bumping with the ceiling then they need to trim it down by using the saw. Then use the sandpaper to sand down the rough corners.
Step II: Mount The Hooks
- Detach The Linear: Start by detaching the liner and then press it down adjacent to the hook back. The users need to unbind the hook packaging and then locate the sticky strip. Then locate the red side and then peel off the liner. Once the users detached the liner then they need to press it adjacent with the hook back. If in case the users are unable to find the sticky strip then they are advised to locate the hook word and eventually peel it off.
- Press It: Then detach the liner and then press it adjacent with the wall for near about thirty seconds. The users are advised to be sure that they are correctly placing the hooks. Then they need to drift the base of the hook and then press it adjacent with the wall. If in case the users are using the regular typed hook then they are advised not to drift the base.
- Repeat The Procedure: The users require to follow the same procedure for another hook as well and then allow the hook to affix strongly with the wall for near about one hour. The users are advised not to act impatiently and not to hang the rod until it is not perfectly affixed with the wall.
- Hang The Curtains: After one hour, the user needs to place their rod on the hook and then hang their curtains as well.
Step III: Paint Down The Hooks
- Use The Rubbing Alcohol: Start by wiping down the hooks by using the rubbing alcohol and it is very essential as the oil won't allow the paint to get stuck. The users need to soak up the cotton ball or the cloth in the rubbing alcohol and wipe the outer surface with it. Then wrap out the tape on the part that is hooked by using the painter's tape accordingly.
- Use The Primer: Then apply the layer of the primer over the surface of the hook by using the spray primer and then let the primer to get dried off completely before applying the paint.
- Apply The Paint: Once the primer is dried off completely the users require to apply the paint to the hook as per the wall color and then allow the paint to get dried off completely before applying another layer of the paint.
- Remove The Tape: Finally detach the paint and then let the paint get dried off completely for few hours and then the users can easily use their hooks. The users are advised not to apply any sealant over it as that can easily destroy the metallic finish on the hooks.