Hacks For Curtains That Are Too Long: 5 Easy Hacks For Curtains


5 Easy Hacks For Curtains That Are Too Long

The curtains can easily make your window look attractive and good looking which is one of the best things about your room’s design plan. They can also provide design panache, sun-fade & heat protection as well as give space for privacy. But, if you purchased the ready-made curtains, they may not be of the right length of the window. Without using a sewing machine, there are different ways to make your curtains short & that too without using the hemming process. If you want to know the proper solution for the long curtains, then you need to read and follow the best hacks for your curtains, which are mentioned below:

1. Move The Rod

In order to shorten your curtains without hemming, the best way is to move your curtain rod. The optimum rod placement is one-third of the distance betwixt your ceiling & the top of your window frame, but mounting your curtains much higher will also increase the perceived size of your window & will also create the illusion that your walls are taller. If you can then mounting your curtains at the ceiling height creates the biggest impact.

2. Tie Them Back

You just need to install a tieback and the blouse the extra curtain over your tie creating a languish effect. If you have lots of extra curtains, install 2 tiebacks on each side & create a double swag. This will work best with the stationary panels, it does not apportion for the curtains that must be opened & closed intermittently.

3. Fuse Or Glue

If you want to create horizontal pleats in your curtains, then simply fasten them in place with the help of fabric glue or fusible webbing. You just need to lay your curtains flat on your table having the right side visible. You can create one or more pleats across your panel & pin the pleats in the place. Iron your pleats. You just need to remove the pins & then turn your curtain over. Then, into each pleat insert fusible webbing, simply refold your pleat along with the pressed lines & fuse your pleat in place following the manufacturer’s installation guidance. If you are going to use fabric glue, drizzle the glue constantly into your pleat & allow it to dry according to the manufacturer’s guidance.

4. Pinch & Pickup

You need to pinch your curtain face near the top of your curtain & lift the pinched section up to your curtain rod. Fasten all the pinch to the top of your curtain with the assistance of tag gun supplied with the short tags, or clip with a curtain ring & clip. For example, you need to add curtain rings with clips betwixt the existing curtain rings, simply clip your curtain to one ring, you just need to clip a pinch to your next ring & then clip to the top of your curtain & then to a pinch, continuing across your curtain.

5. Fake A Valance

You can fold the top of your curtain into a forward-folding pleat, in order to create a self-valance & then attach your curtain to the curtains rod with rings and clips. For example, you need to divide the extra fabric length into 3. Simply draw a line across the front of your curtain down from the top edge at each 3rd of the total length extra. Simply fold your curtain with wrong sides together, along with the two-thirds line & press your fold. You need to fold your curtain again on the one-third line, matching it to the 2-3rd line. You need to fold both layers together and then press on this fold. Clip your curtain to the rings on this fold.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2020 GetRit.Com   All Rights Reserved