Easiest Way To Clean Grout Without Scrubbing: 5 Best Ways Of Cleaning A Grout Without Scrubbing


5 Best Ways Of Cleaning A Grout Without Scrubbing

The Portland cement is the major component that is found in the grout. It takes a few days or a few weeks to get hardened completely. Once it gets cured the pre-existing grout could become very hard to clean it within the surface of the walls and the tile floor as well. You are advised not to use the chisel or any other metal tool to remove the grout as it might result in damaging the tiles. However, you can use the soaking and the scraping process to remove the grout.

Way 1: Peroxide And Baking Soda

  • Mix Baking Soda, Peroxide & Dish Soap: Combine or put together the baking soda, peroxide, and dish soap and then apply the solution onto the stained grout. Allow the solution to stay in place for nearly 10 minutes before scrubbing delicately as long as any discoloration starts to fade.
  • Mix Equal Parts Of Baking Soda & Peroxide: As long as you combine or put together equal parts of baking soda and peroxide, you will end up with a powerful as well as an effective cleaner. Mixing dish soap to the combination of baking soda & peroxide solution is not required, however, it is an excellent choice when it comes to kitchens or any place that gets exposed to grease.
  • Baking Soda Is A Handy Cleaner For Grout: Baking soda is considered a handy cleaner for grout, due to the fact that it gives the soap a gritty sort of texture. This will help get rid of any stubborn dirt that is stuck in your grout. Sometimes, baking soda & peroxide mixture is the only way when it comes to polishing the worst stains from dirty grout lines. Use this mixture in order to get rid of grout haze from tiles, too, as it also has multiple bathroom as well as kitchen applications.

Way 2: Vinegar And Citrus Gentle Grout Cleaner

  • Mix Baking Soda, Lemon Juice & White Vinegar With Warm Water: Take a spray bottle & combine or put together the warm water, baking soda, lemon juice, and white vinegar in it, and sprinkle the solution onto the dirty grout. Allow the mixture to sit on the dirty grout for at least an hour.
  • Scrub The Grout Gently: Scrub the grout delicately afterward which will help you get rid of the majority of the dirt & grime & you don't need much elbow grease. This is the easiest way when it comes to removing mortar from a tile, as well.
  • Vinegar Is Useful, Gentle & Affordable Cleaner: Vinegar is not the most potent household cleaner available, however, it is useful and extremely gentle, as well as affordable. While you will not want to use vinegar on natural stone tiles, ceramic tile and the majority of the other floor tiles are safe.
  • Garden Sprayer: Make a larger batch of this solution when it comes to cleaning vinyl siding without scrubbing. A garden sprayer should work exceptionally well for application. Use the garden hose when it comes to rinsing.

Way 3: Clorox Bleach

  • Apply Undiluted Compound To The Dirty Grout: When it comes to using chlorine bleach or OxiClean for cleaning tile, you need to take the undiluted compound, spread it to the dirty grout, and wait. Make sure not to leave the bleach on the tile too long, otherwise, it will have a permanent damage to your grout, however, the longer you leave it, the minimum are the chances that you will need to scrub.
  • Use Oxygen Bleach: In spite of the fact that bleach is not necessarily a no-scrub cleaner, but still it is the most powerful, so it is the closest to a no scrub grout cleaner that you will find. It is highly recommended to use oxygen bleach before trying chlorine bleach, due to the fact that it is a bit gentler.
  • Ventilate Your Area & Use Skin & Eye Protection: Also, it is important to ventilate your area well by keeping all the windows open and turning on fans before using bleach of any kind, and always make sure to use proper skin and eye protection.

Way 4: Alkaline Cleaners

  • Manufacturer-formulated Cleaning Solutions: Alkaline cleaners generally consist of manufacturer-formulated cleaning solutions that are particularly made for cleaning the grout of mold as well as mildew. Any cleanser that is marketed in the direction of the bathroom grout cleaning should be enough for this purpose.
  • Chemical Cleaning Products: When it comes to chemical cleaning products, the cleaning process varies which is entirely dependent on the product, so always read & go through the manufacturer’s diluting and usage instructions printed on the bottle. Completely dependent on the product, alkaline cleaners can also be questionable when it comes to human health, so you need to follow all instructions regarding bodily protection before you use these cleaners.
  • Always Use Proper Protection: It is strongly recommended to always use proper protection with cleaners of any kind, irrespective of whether you made it yourself or not. It is also a good idea to have a scrubber on hand such as an old toothbrush, bristle brush, scrub brush, or a specially-made grout brush.

Way 5: Sealing Your Grout

  • Seal Your Grout Well: The best way, without any doubt, that will guarantee that you will not need to scrub your grout and tiles, is to seal your grout well and usually with grout sealer.
  • Clean Tile Grout Of All Types: The compounds and cleaning tips should clean tile grout of all kinds, such as white grout, colored grout, floor grout on tile floors, or wall grout on shower walls.
  • Rinse Or Mop The Tile With Water: When your are done with cleaning process, always finish by rinsing or mopping the tile using water, before drying it thoroughly. When it comes to a chemical-free method, steam cleaners are effective & successful on grout stains, too, and a good power wash solution is the best way to finish things off.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved