Best Primer To Use After Removing Wallpaper: Step By Step Process To Paint After Removing Wallpaper


Step By Step Process To Paint After Removing Wallpaper

Wallpaper is one of the great ways when it comes to covering a fault, blemish, or undesirable feature and add color as well as pattern to space especially walls. It is extremely important to get your wallpaper ready by priming for those colorful coats of paint. Prime with an alkyd-based primer, like Benjamin Moore Fresh Start All-Purpose Alkyd Primer, instead of a latex primer. Latex primers can saturate through the wall covering, which in turn causes it to come off. As soon as the wall covering is prepped and primed, you can top-coat it with any product. Follow the below-mentioned steps carefully in order to paint the walls after removing the wallpaper.
  1. Remove Any Remaining Glue: Wallpaper, in all likelihood, will leave some glue behind when it is removed. After removing the wallpaper, wash the walls with the help of trisodium phosphate(TSP) or a solution of vinegar and water. Smoothly scrub, and make sure not to get the wall too wet. TSP can be tough on your hands, so it is advisable to wear gloves when using this product. You don't need to get every last bit of glue off, however, get rid of all the backing paper if possible, due to the reason that it will show through the paint. Rinse the walls using warm water and then let them dry completely.
  2. Smooth The Surface: If the leftover wallpaper adhesive has made the wall feel rough, then it is important to sand it gently in order to break down the texture, which in turn will help make it smooth again. If you were unable to get rid of all the backing paper when you wash the walls, the sandpaper will be the best option. Work on smooth walls only as the textured walls can be smoothly sanded however, be extra cautious not to sand off any texture.
  3. Prime: If you have removed all the glue and the surface is smooth, spread a coat of good latex primer. Two good brands of primer that are highly recommended include Gripper and Zisser 123. If glue still remains, you can use Universal Oil Base (like Kilz) or a Shellac Primer, latex will soften as well as raise the remaining adhesive. Take care to seal any remaining backing paper, otherwise, it might lift later, removing the paint up with it. This is another good reason in order to get rid of all the persisting backing paper before priming.
  4. Patch Any Damaged Areas: It is prevalent for wallpaper removal to cause some damage to the wall underneath. With the help of a joint compound as well as a wide putty knife or drywall knife, fill in any dings or gouges. Do a base coat over any persisting backing paper. This should prevent the edges of the paper from showing through the final finish. Let it dry, before sanding smooth, feathering the edges. Seal repairs using the latex primer and allow to dry. This will help camouflage the repairs after painting.
  5. Paint: Finally, paint the wall, using the roller of your choice. Patched areas occasionally appear as a dull spot, this is easily fixed using another coat of paint. Using high-quality paint as well as good painting techniques, everything will be fine.
Connect with GetRit GetRit.com Furniture Facebook GetRit.com Furniture Twitter
Copyrights (©) 2024 GetRit.Com   All Rights Reserved